Items where Division is "Faculties (pre 2018 reorg) > Faculty of Engineering and the Environment (pre 2018 reorg) > Aeronautics, Astronautics & Comp. Eng (pre 2018 reorg) > Computational Engineering & Design Group (pre 2018 reorg)
Current Faculties > Faculty of Engineering and Physical Sciences > School of Engineering > Aeronautical and Astronautical Engineering > Aeronautics, Astronautics & Comp. Eng (pre 2018 reorg) > Computational Engineering & Design Group (pre 2018 reorg)
Aeronautical and Astronautical Engineering > Aeronautics, Astronautics & Comp. Eng (pre 2018 reorg) > Computational Engineering & Design Group (pre 2018 reorg)" and Year is 2014
 | Up a level |
Number of items: 39.
Co-creation in complex supply chains: the benefits of a Value Driven Design approach - Marco Bertoni, Hakki Eres and James Scanlan
Type: Book Section
| 2014
| Springer
| Item not available on this server.
Designing a spin-Seebeck diode - Simone Borlenghi, Wei Wei Wang, H. Fangohr, Lars Bergqvist and Anna Delin
Type: Article
| 2014
Editorial. Nanostructured materials for microelectronic applications - Shoou-Jinn Chang, Teen-Hang Meen, Stephen D. Prior, Kin-Tak Lam and Liang-Wen Ji
Type: Article
| 2014
| Item not available on this server.
Cost data modelling and searching to support low volume, high complexity, long life defence systems development - W.M. Cheung, R. Marsh, L.B. Newnes, A.R. Mileham and J.D. Lanham
Type: Article
| 2014
| Item not available on this server.
Mapping customer needs to engineering characteristics: an aerospace perspective for conceptual design - M.H. Eres, M. Bertoni, M. Kossmann and J.P. Scanlan
Type: Article
| 2014
Design and flight test of a civil unmanned aerial vehicle for maritime patrol: the use of 3D-printed structural components - Mario Ferraro, Andrew Lock, James P. Scanlan and Andy J. Keane
Type: Conference or Workshop Item
| 2014
Satellite measurement of ocean turbulence - Simon Gareth George
Type: Thesis
| 2014
Value-based decision environment: vision and application - Dirk Gorissen, Erika Quaranta, Mario Ferraro, Benjamin Schumann, Jeroen Van Schaik, Marc Bolinches, Andy J. Keane and Jim Scanlan
Type: Article
| 2014
An investigation into information reuse for cost prediction - from needs to a data reuse framework - Joshua Jeeson Daniel
Type: Thesis
| 2014
Nonequivalence of updating rules in evolutionary games under high mutation rates - G.A. Kaiping, G.S. Jacobs, S.J. Cox and T.J. Sluckin
Type: Article
| 2014
Topology optimisation: increasing the speed and reliability of design - Liam Kelly, Andy J. Keane, Andras Sobester and David J.J. Toal
Type: Conference or Workshop Item
| 2014
An improvement of the concept design analysis method by the use of the avoidance function - A. A. Khamukhin and M.H. Eres
Type: Conference or Workshop Item
| 2014
| Item availability restricted.
A frequency averaging framework for the solution of complex dynamic systems - Christophe Lecomte
Type: Article
| 2014
Time response of complex dynamic systems - Christophe Lecomte
Type: Conference or Workshop Item
| 2014
| Item not available on this server.
Zero and root loci of disturbed spring-mass systems - Christophe Lecomte
Type: Article
| 2014
Magnetoelectric control of surface anisotropy and nucleation modes in L10-CoPt thin films - Priyanka Manchanda, Pankaj Kumar, Hans Fangohr, David J. Sellmyer, Arti Kashyap and Ralph Skomski
Type: Article
| 2014
Editorial of ICICE 2012 for the special issue of Engineering Computations - Stephen Prior, Artde Lam and Teen-Hang Meen
Type: Article
| 2014
| Item not available on this server.
Energy conservation techniques: increasing the endurance of small UAVs - Stephen D. Prior
Type: Conference or Workshop Item
| 2014
| Item not available on this server.
Energy conservation techniques: increasing the endurance of small UAVs - Stephen D. Prior
Type: Conference or Workshop Item
| 2014
| Item not available on this server.
The uses and abuses of personal UAS - Stephen D. Prior
Type: Article
| 2014
Isle of Wight UAV crossing. Interview with Stephen Prior and Mehmet Erbil - Stephen D. Prior and Mehmet Ali Erbil
Type: Art Design Item
| 2014
| BBC South Today
Simulation of longitudinal stent deformation in a patient-specific coronary artery - G. Ragkousis, N. Curzen and N.W. Bressloff
Type: Article
| 2014
Better design decisions through operational modeling during the early design phases - Benjamin Schumann, Mario Ferraro, Amrith Surendra, James P. Scanlan and Hans Fangohr
Type: Article
| 2014
| Item availability restricted.
Research data management - Mark Scott
Type: Thesis
| 2014
Four suggestions for better parametric geometries - Andras Sobester
Type: Conference or Workshop Item
| 2014
| American Institute of Aeronautics and Astronautics
| Item availability restricted.
High Altitude Gas Balloon Trajectory Prediction - a Monte Carlo Model - Andras Sobester, Helen Czerski, Niccolo Zapponi and I.P. Castro
Type: Article
| 2014
| Item availability restricted.
Type: Book
| 2014
| Wiley
| Item not available on this server.
Engineering design applications of surrogate-assisted
optimization techniques - Andras Sobester, Alexander I.J. Forrester, David J.J. Toal, Es Tresidder and Simon Tucker
Type: Article
| 2014
Libration-Point Orbit missions disposal at the end-of-life through solar radiation pressure - S. Soldini, Camilla Colombo, S.J.I. Walker and M. Landgraf
Type: Conference or Workshop Item
| 2014
Some modifications of MPS method for incompressible free surface flow - Zhe Sun, K. Djidjeli, J.T. Xing and A. Javed
Type: Conference or Workshop Item
| 2014
On the potential of a multi-fidelity G-POD based approach for optimization & uncertainty quantification - David J.J. Toal
Type: Conference or Workshop Item
| 2014
Multi-fidelity multidisciplinary whole engine thermo-mechanical design optimization - David J.J. Toal, A.J. Keane, Diego Benito, Jeffery Dixon, Jingbin Yang, Matthew Price, Trevor Robinson, Alain Remouchamps and Norbert Kill
Type: Article
| 2014
Computational analysis of the flow field and noise radiation
of a generic main landing gear configuration - Koen Van Mierlo
Type: Thesis
| 2014
A framework for design rationale capture and use during geometry design - Jeroen Robbert Van Schaik
Type: Thesis
| 2014
| University of Southampton
Constrained design optimization using generative topographic mapping - Asha Viswanath, A.I.J. Forrester and A.J. Keane
Type: Article
| 2014
| Item availability restricted.
An accelerated medial object transformation for whole engine optimisation - Leran Wang, David J.J. Toal, A.J. Keane and Felix Stanley
Type: Conference or Workshop Item
| 2014
Dynamic control of spin wave spectra using spin-polarized currents - Qi Wang, Huaiwu Zhang, Hans Fangohr, Faiming Bai and Zhiyong Zhong
Type: Article
| 2014
Prometheus: a geometry-centric optimisation system for combustor design - X. Zhang, David J.J. Toal, N.W. Bressloff, A.J. Keane, F. Witham, J. Gregory, S. Stow, C. Goddard, M. Zedda and M. Rodgers
Type: Conference or Workshop Item
| 2014
The effect of external mean flow on sound transmission through double-walled cylindrical shells lined with poroelastic material - Jie Zhou, Atul Bhaskar and Xin Zhang
Type: Article
| 2014
| Item not available on this server.